Safety Instructions
Please read this safety instructions before you use the product to prevent injury to yourself and others and to prevent property damage.
The term ‘product’ in this manual refers to the product and any items provided with the product.
Compliance Information
Used to indicate warning information that could lead to serious injury or death if violated while using the product.
Used to indicate caution information that may result in minor injury or product damage if violated while using the product.
Used to provide notes or additional information while using the product.
Note
Used to provide notes or additional information while using the product.
Warning
Install
Be especially careful of miswiring when using high-capacity power supplies.
- Serious fires, electric shocks, or product damage may occur due to miswiring.
Do not allow users to install or repair the product arbitrarily.
-
Causes fire, electric shock, or injury.
-
No free repair service will be provided if the product is damaged due to arbitrary installation or repair by the user.
Do not install the product in places exposed to direct sunlight, moisture, dust, or soot, or where gas may leak.
- May cause fire or electric shock.
When installing the product outdoors, make sure to install it in a shaded and well-ventilated area.
Do not use a completely sealed enclosure when installing the product outdoors.
- The internal temperature of the enclosure may rise due to direct sunlight, causing fire, electric shock, or product damage.
Do not install the product in places where heat is generated, such as near heaters.
- May cause fire or electric shock due to overheating.
Do not install in damp places.
- May cause electric shock or product damage due to moisture.
Do not install in places with electromagnetic interference.
- May cause electric shock or product damage.
When mounting the camera on a wall or ceiling, make sure it is securely attached and does not wobble.
- May cause serious injury if the product falls.
Do not connect multiple cameras to the same power adapter at the same time.
- May cause overheating or fire if the rated power capacity is exceeded.
When installing the camera, keep the installation area clear of other people.
- May cause serious injury if the product falls or in other accidents.
Avoid pinching cables or damaging wire insulation, as this can cause product damage or fire
Usage
Do not allow liquids such as water, beverages, or chemicals to enter the product.
- May cause fire, electric shock, or product damage.
Do not use damaged power adapters or plugs, or loose outlets.
- If connections are unstable, may cause fire or electric shock.
Do not bend or break the power cord excessively.
- May cause fire or electric shock.
Do not place conductive metal objects (coins, tools, etc.) or containers of liquid on top of the product.
- May cause electric shock, fire, or injury from falling objects.
Caution
Install
Read this manual carefully before installing the product to ensure safe and correct installation.
When wiring power cables and connectors, make sure to turn off the power to all devices you are connecting before wiring and connecting.
- Devices may malfunction.
Before connecting the power to the product, check the manual again to ensure that wiring is correct, then connect the power.
Do not install the product in places directly exposed to sunlight or ultraviolet light.
- May cause product damage, malfunction, discoloration, or deformation.
Do not leave power cables in passageways.
- May cause bodily injury or product damage.
Do not install near strong magnetic objects such as magnets, TVs, CRT monitors, or speakers.
- The device may malfunction.
When installing the product on a wall, do not seal around the product with silicone or similar materials.
- The device may malfunction.
When installing multiple devices, ensure the minimum spacing distance is observed.
- May affect the RF and BLE performance of other devices, causing them to malfunction.
Use a power adapter that has IEC/EN 62368-1 approval and is rated above the power consumption of the terminal device. It is recommended to use the power adapters sold by Suprema.
-
Using an unsuitable power supply may cause devices to malfunction.
-
Refer to the Power in the product specifications for maximum current consumption specifications.
Do not connect the power supply and PoE+ power together.
- Devices may malfunction.
It is recommended to use an enclosure when installed outdoors with full exposure.
- Decreased waterproof and dustproof performance may cause malfunction.
When connecting PoE+ power, make sure to connect it according to PoE+ or PoE++ standards.
- Using standard PoE may cause devices to operate unstably or be permanently damaged.
When installing the product on a wall, do not seal around the product with silicone or similar materials.
- The device may malfunction.
Remove valuables or fragile items from beneath the installation area before beginning.
- May lead to unexpected accidents.
Wear safety gloves when installing or removing the product.
- May cause burns from hot device surfaces during operation.
Do not forcefully assemble or install the product.
- May cause product damage or malfunction.
Do not install the camera in environments where chemical substances or fumes are present. Cooking oil residues can also cause product damage or deformation, so do not install near kitchens.
- May cause severe physical damage to the product.
Keep chemical solutions from coming into contact with the product's exterior during installation.
- Certain chemical solvents, such as those in some cleaners or adhesives, can cause severe surface damage.
Usage
Do not drop or subject the product to shock.
- The device may malfunction.
Ensure the power supply is not interrupted during firmware upgrades of the product.
- The device may malfunction.
Do not press the product's buttons (touchpad) forcefully or use sharp tools to press them.
- The device may malfunction.
Use the product within -40 °C ~ 60 °C and store it at appropriate temperatures, not too low or too high.
- The device may malfunction.
Be careful when cleaning the product.
-
Gently wipe the product surface with a clean, dry cloth.
-
If disinfecting the product, dampen a clean cloth with a suitable amount of disinfectant alcohol and gently wipe the product surface. Use disinfectant alcohol that contains 70-75% isopropyl alcohol and a clean, lint-free soft cloth.
-
Do not spray disinfectant directly onto the product.
Do not use the product for purposes other than its intended use.
- The device may malfunction.
Do not operate or tamper with the product using unapproved tools.
- May cause product damage or malfunction. Use only the specified tools.
Do not install or disassemble the product in any way not specified in the manual.
- May prevent the product from functioning normally or performing as intended.