Ir al contenido principal

Firmware Version 1.6.2 (Build No. 1.6.2_241113)

Release|2024-11-14

Precaución

Devices with the new BLE chip and the SE processor cannot downgrade to a lower version after upgrading the firmware to v1.5.0 or higher. Devices with existing BLE chips and SE processor can be downgraded to a lower version.

For more information, check the serial number of the device and contact the Suprema.

New Features and Improvements​

  1. Supports Custom Smart Card Layout.

  2. Supports the Display Result from Controller feature for displaying authentication success or failure results from a 3rd party controller on the device screen when using Intelligent Slave.

  3. Supports the Auth Result Display Option that allows you to select how the user ID and name are displayed on the authentication result screen of the device.

    • User ID Display

    • User Name Display

  4. Supports feature to set the baud rate of slave devices.

  5. Extended the user expiration period to a maximum of '2037-12-31'.

Bug Fixes​

  1. When Relay is set in the device menu, the door does not open with a mobile card. Versión afectada: 1.0.1

  2. Calling the BS2_GetDeviceCapabilities function on a slave device connected via RS-485 outputs incorrect values. Versión afectada: 1.0.0

  3. Some smart cards fail to be recognized in environments using the new SE chip firmware. Versión afectada: 1.5.0

  4. When a fingerprint is entered into the slave device and fingerprint matching is in progress, the master device does not accept a fingerprint scan. Versión afectada: 1.0.0

  5. When the Reset Time for Timed Anti PassBack is set to 0, anti-passback does not work. Versión afectada: 1.0.0

  6. When authentication fails due to a fake fingerprint on a door with Dual Authentication enabled, the dual authentication process does not restart from the beginning. Versión afectada: 1.5.0

  7. Fixed the text displayed on the screen when a Timed Anti PassBack violation occurs. Versión afectada: 1.0.0

¿Fue útil esta página?