Firmware Version 1.0.1 (Build No. 1.0.1_221020)

Release|2022-10-21

New Features and Improvements

---

1. Improved motion detection performance for low-light environments.

2. Improved Visual Face matching algorithm.

3. Improved all pop-up messages displayed on the device to operate according to the time set in Message Timeout.

4. Fixed Korean and English strings in the RTSP menu.

Bug Fixes

---

1. When upgrading resources or firmware from BioStar 2, the device could not check the progress of the upgrade because no information was displayed. Versión afectada: 1.0.0

2. When synchronizing multiple users to a device in BioStar 2 and then restarting the device, the User Usage on the device displays a different number of visual faces than the number of synchronized. Versión afectada: 1.0.0

3. When entering the device detail page after adding a logo image to the device connected as a slave, an Invalid payload error occurs and the RS-485 get disconnected. Versión afectada: 1.0.0

4. When Device Hashkey Management is set to Use in BioStar 2 and migration proceeds, all users are deleted from the device, but a delete notification pop-up is not displayed. Versión afectada: 1.0.0

5. Device hangs intermittently and then restarts. Versión afectada: 1.0.0

6. When entering the Wireless, the new SSID does not appear, but only the previously searched SSID appears. Versión afectada: 1.0.0

7. When enrolling a visual face or card on a device using the BioStar 2, the scan screen is not visible and the screen saver state remains. Versión afectada: 1.0.0

8. When the call button on the main screen is pressed with only one extension number stored in the device, it does not connect directly. Versión afectada: 1.0.0

9. In Edit User, if you select Extended Private Auth Mode as ID + Fingerprint/PIN and press OK, the fingerprint icon is incorrectly displayed as a face icon in the Extended Private Auth Mode list. Versión afectada: 1.0.0

10. Authentication failure occurs when authenticating with AoC with private auth mode set to Card + Face. Versión afectada: 1.0.0

11. When the device is restarted via BioStar 2, only a notification sound plays and the restart pop-up message does not appear. Versión afectada: 1.0.0

12. Firmware upgrade via USB restarts the device without a success or failure popup message. Versión afectada: 1.0.0

13. In BioStar 2's T&A menu, the Schedule display part is blank when creating a T&A Code with a Schedule other than Always and selecting the T&A Code on the device. Versión afectada: 1.0.0

14. Memory usage incorrectly displayed in DRAM Usage in Memory Info. Versión afectada: 1.0.0

15. When entering the menu from a device connected as a slave, a normal menu touch sound plays instead of a warning sound. Versión afectada: 1.0.0

16. When enrolling a visual face in the USER menu in BioStar 2, when the scan waiting time exceeded while enrolling the 1st face and then scanning the 2nd face, the face enrolled in the 1st appears. Versión afectada: 1.0.0

17. If the network is connected to a wireless LAN and then enters Wireless again after changing to an ethernet connection, the wireless AP list is not displayed. Versión afectada: 1.0.0

18. Device hangs intermittently when Wiegand Input/Output setting is set to Output. Versión afectada: 1.0.0

19. Extension number gets stored in the phonebook while exceeding the maximum characters in the Display Name of the Intercom settings. Versión afectada: 1.0.0

20. When entering the edit screen by selecting the Auth Mode set in the device's Auth Mode, the touch sound does not play. Versión afectada: 1.0.0

21. Device connected as a slave intermittently operates while disconnected. Versión afectada: 1.0.0

22. An error occurs when calling the extension number when the Intercom of the device is set to Not Use via BioStar 2 while the list of extension numbers is displayed by pressing the call button on the main screen of the device. Versión afectada: 1.0.0

23. In the screen to set the Schedule in Auth Mode, the already created schedule is shown as a duplicate. Versión afectada: 1.0.0

24. When the device is in the middle of Factory Default process, the device hangs while loading. Versión afectada: 1.0.0

25. When the Language of the device is set to Custom, the Voice Instruction menu part of Sound displays as a blank. Versión afectada: 1.0.0

26. When the Time Zone of the master device connected via RS-485 is changed, the Time Zone of the slave device does not change. Versión afectada: 1.0.0

27. When authenticating with a mobile card set to NFC, authentication fails and the device restarts intermittently Versión afectada: 1.0.0

28. The correct message does not appear when an unenrolled card is scanned with Filter set to Card in the user search Versión afectada: 1.0.0

29. The pop-up to set the Filter on the EVENT LOG search screen does not disappear even after the time set in the device's Menu Timeout has elapsed. Versión afectada: 1.0.0

30. Event log is not logged when Time Zone is changed on the device. Versión afectada: 1.0.0

31. When scanning Visual Face via BioStar 2 while the device is in the SETTINGS, the scan screen does not close on the device even after scanning is complete. Versión afectada: 1.0.0

32. Baud Rate selection pop-up appears when touching an empty space at the bottom of the Ethernet screen. Versión afectada: 1.0.0

33. When sending a user whose card is duplicated with another user from BioStar 2 to the device, the user is deleted from the device. Versión afectada: 1.0.0

34. When the firmware is upgraded for each device connected as master-slave, the slave device completes normally, but the master device hangs. Versión afectada: 1.0.0

35. RTSP connection termination event log is not logged and RTSP icon is not deleted even after setting RTSP to Not Use. Versión afectada: 1.0.0

36. Does not restart on Restore Default due to setup error. Versión afectada: 1.0.0

37. Date & Time not displayed correctly. Versión afectada: 1.0.0

38. When adding a user, the backlight does not turn off when waiting without card input on the card scan screen. Versión afectada: 1.0.0

39. Search does not work when searching by Start Time and End Time in EVENT LOG. Versión afectada: 1.0.0

40. An incorrect schedule displays in the Edit Auth Mode. Versión afectada: 1.0.0

41. If you scan a Wiegand format card that is not set when enrolling a card to a user and then scan a normal card, it will not be scanned. Versión afectada: 1.0.0

42. The device retains the call screen even after the recipient terminates the call. Versión afectada: 1.0.0

43. WiFi MAC does not appear in DASHBOARD and Device Info for Wi-Fi supported models. Versión afectada: 1.0.0

44. On the scan card screen, the background allows touch and the face can get authenticated. Versión afectada: 1.0.0

45. When enrolling a card in BioStar 2, after selecting Write Smart Card, the device restarts while waiting for scan. Versión afectada: 1.0.0

46. An issue occurs when upgrading the firmware of a slave device from BioStar 2 while the device is connected as Master-Slave. Versión afectada: 1.0.0

    • Slave device disconnects and the firmware upgrade fails.

    • Master device restart fails.

47. The OK button does not work when repeatedly searching the EVENT LOG. Versión afectada: 1.0.0

48. Intermittently, the image log is logged abnormally. Versión afectada: 1.0.0

49. Speaker turns on and off repeatedly when multiple sound files are played continuously. Versión afectada: 1.0.0

50. The device restarts abnormally when the firmware is upgraded while the device is locked. Versión afectada: 1.0.0

51. Wireless connection intermittently disconnects when sending Visual face from BioStar 2 to device. Versión afectada: 1.0.0

52. The screen turns off at the time set in Menu Timeout during an Intercom call. Versión afectada: 1.0.0

53. When deleting all logs, image logs does not get deleted. Versión afectada: 1.0.0

54. VFMCore version information is not displayed when long-touching the MAC in Device Info. Versión afectada: 1.0.0

55. When issuing a Smart Card, if a fingerprint/face is included in Private Auth Mode, the issuance fails intermittently in a specific card. Versión afectada: 1.0.0