Firmware Version 2.2.1 (Build No. 2.2.1_241204)
Release|2024-12-09
For devices with the new SE processor, after upgrading the firmware to v2.1.0 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version.
Devices with existing SE processor can be downgraded to a lower version.
For more information, check the serial number of the device and contact the Suprema.
New Features and Improvements
- Changes to a new LCD screen.
For devices with firmware v2.2.0 or earlier, be sure to upgrade the firmware to the latest version before replacing it with a new LCD display.
The devices using the new LCD display cannot be downgraded to a version earlier than v2.2.1 after upgrading the firmware to v2.2.1 or higher.
Bug Fixes
-
After a firmware upgrade, authentication failure occurs with the previously used cards. Versión afectada: 2.2.0
-
When using Thermal Camera mode with the TCM10 connected, the face authentication screen is displayed abnormally. Versión afectada: 2.0.1
-
Custom smart cards with the DESFire Advanced option enabled fail to be recognized. Versión afectada: 2.2.0
-
Some smart cards fail to be recognized in environments using the new SE chip firmware. Versión afectada: 2.1.4
-
The Mask All but First Letter option in the Auth Result Display Option is not applied correctly. Versión afectada: 2.2.0
-
After transferring more than 50,000 users with 1:N credentials to the device and then upgrading the firmware, the device freezes. Versión afectada: 2.1.1
-
When a user with more than two cards enrolled attempts card authentication to the Wiegand output device, the ID of a card other than the authenticated card is output. Versión afectada: 2.1.1