A door is the basic unit for access control. It consists of a relay and other optional components such as door sensor and exit button. A door can be configured on one or more devices connected by RS485.

Information

message DoorInfo {
  uint32 doorID;
  string name;

  uint32 entryDeviceID;
  uint32 exitDeviceID;

  Relay relay;
  Sensor sensor;
  ExitButton button;

  uint32 autoLockTimeout;
  uint32 heldOpenTimeout;

  bool instantLock;
  uint32 unlockFlags;
  uint32 lockFlags;
  bool unconditionalLock;

  repeated action.Action forcedOpenActions;
  repeated action.Action heldOpenActions;

  uint32 dualAuthScheduleID;
  DualAuthDevice dualAuthDevice;
  DualAuthType dualAuthType;
  uint32 dualAuthTimeout;
  repeated uint32 dualAuthGroupIDs;
}
doorID
The ID of the door.
name
Maximum 48 characters in UTF-8 encoding.
entryDeviceID
The ID of the entry device. If the door has only one device, you should set it as the entry device.
exitDeviceID
The ID of the exit device. You have to set it only if the door consists of two devices connected by RS485.
relay
The port information of the relay.

There must be one relay per each door. So, you cannot set 0 to Relay.deviceID.

sensor
The port information of the door sensor. To use door alarms such as FORCED_OPEN or HELD_OPEN, you have to configure the door sensor. If there needs to be no door sensor, just set 0 to Sensor.deviceID.
button
The port information of the exit button. If there needs to be no exit button, just set 0 to ExitButton.deviceID.
autoLockTimeout
If it is not 0, the door will be locked automatically after being open for autoLockTimeout seconds. See also unconditionalLock.
heldOpenTimeout
If it is not 0, the door will generate the HELD_OPEN alarm after being open for heldOpenTimeout seconds.
instantLock
If true, the door will be locked immediately when the sensor detects it is closed.
unlockFlags/lockFlags
A mask of DoorFlag. Just set NONE for V1.0. The other options will be available in the future versions of G-SDK.
unconditionalLock
This flag determines how to act after the autoLockTimeout. If it is true, the door will be locked even if the door sensor detects it is open. If it is false, the door will be locked only when the door sensor detects it is closed.
forcedOpenActions
When the sensor detects the door is open by force, i.e., not by normal operations, the FORCED_OPEN alarm will be generated. You can configure which actions should be triggered by this alarm. See Action for the available actions.
heldOpenActions
When the sensor detects that the door is open longer than the heldOpenTimeout, the HELD_OPEN alarm will be generated. You can configure which actions should be triggered by this alarm. See Action for the available actions.
dualAuthScheduleID
If it is not 0, the dual authentication will be enabled for the specified schedule. For the dual authentication, two users should authenticate themselves to access the door.
dualAuthDevice
Specify the devices to which the dual authentication will be applied. For example, if it is DUAL_AUTH_ENTRY_DEVICE_ONLY, it is applied to the entry device only.
dualAuthType
If it is DUAL_AUTH_LAST, the second user belonging to dualAuthGroupIDs should authenticate after the first user within dualAuthTimeout. If it is DUAL_AUTH_NONE, dual authentication is not needed.
dualAuthTimeout
The maximum interval in seconds between the two authentications. That is, the second user should authenticate within this timeout after the first user’s authentication.
dualAuthGroupIDs
See dualAuthType. Maximum 16 access groups can be set as dual authentication groups.
message Relay {
  uint32 deviceID;
  uint32 port;
}

message Sensor {
  uint32 deviceID;
  uint32 port;
  device.SwitchType type;
}
type
The type of the sensor.
message ExitButton {
  uint32 deviceID;
  uint32 port;
  device.SwitchType type;
}
type
The type of the button.
enum DualAuthDevice {
  DUAL_AUTH_NO_DEVICE	= 0x00;
  DUAL_AUTH_ENTRY_DEVICE_ONLY	= 0x01;
  DUAL_AUTH_EXIT_DEVICE_ONLY = 0x02;
  DUAL_AUTH_BOTH_DEVICE	= 0x03;
};

enum DualAuthType {
  DUAL_AUTH_NONE = 0x00;
  DUAL_AUTH_LAST = 0x01;
};
DUAL_AUTH_NONE
Do not check the access groups of the two users.
DUAL_AUTH_LAST
The second user should belong to the dual authentication groups.

GetList

Get the doors configured on a device.

Request
Parameter Type Description
deviceID uint32 The ID of the device
Response
Parameter Type Description
doors DoorInfo[] The doors configured on the device

GetStatus

Get the status of doors configured on a device.

message Status {
  uint32 doorID;
  bool isOpen;
  bool isUnlocked;
  bool heldOpen;
  uint32 unlockFlags;
  uint32 lockFlags;
  uint32 alarmFlags;
  uint32 lastOpenTime;
}
doorID
The ID of the door.
isOpen
True if the door sensor detects it is open.
isUnlocked
True if the door is unlocked.
heldOpen
True if the door sensor detects it is open longer than the heldOpenTimeout.
unlockFlags
Indicate how the door is unlocked. See DoorFlag for available values.
lockFlags
Indicate how the door is locked. See DoorFlag for available values.
alarmFlags
Indicate the alarm status of the door. See AlarmFlag for available values.
lastOpenTime
The last time when the door was open. In Unix time format.
enum DoorFlag {
  NONE = 0x00; 
  SCHEDULED = 0x01;
  EMERGENCY = 0x02;
  OPERATOR = 0x04;
}

Each door flag has a different priority. The order of priorities are EMERGENCY > OPERATOR > SCHEDULED > NONE.

NONE
The door is locked/unlocked by normal operations.
SCHEDULED
The door is locked/unlocked by Scheduled Lock/Unlock zones. Zones will be supported in the future versions of G-SDK.
EMERGENCY
The door is locked/unlocked by Fire Alarm Zone or Intrusion Alarm Zone. Zones will be supported in the future versions of G-SDK.
OPERATOR
The door is locked/unlocked by operators.
enum AlarmFlag {
  NO_ALARM = 0x00;
  FORCED_OPEN = 0x01;
  HELD_OPEN = 0x02;
  APB_VIOLATION = 0x04;
}
Request
Parameter Type Description
deviceID uint32 The ID of the device
Response
Parameter Type Description
status Status[] The status of the doors configured on the device

Management

Add

Add doors to a device.

Request
Parameter Type Description
deviceID uint32 The ID of the device
doors DoorInfo[] The doors to be configured on the device

Delete

Delete doors from a device.

Request
Parameter Type Description
deviceID uint32 The ID of the device
doorIDs uint32[] The IDs of doors to be deleted from the device

DeleteAll

Delete all doors configured on a device.

Request
Parameter Type Description
deviceID uint32 The ID of the device

Lock/Unlock

You can manually lock, unlock, or release doors.

Lock

Lock doors. If the doorFlag has lower priority than DoorStatus.unlockFlags, the operation will fail.

Request
Parameter Type Description
deviceID uint32 The ID of the device
doorIDs uint32[] The IDs of the doors to be locked
doorFlag uint32 One of DoorFlag

Unlock

Unlock doors. If the doorFlag has lower priority than DoorStatus.lockFlags, the operation will fail.

Request
Parameter Type Description
deviceID uint32 The ID of the device
doorIDs uint32[] The IDs of the doors to be unlocked
doorFlag uint32 One of DoorFlag

Release

Reset the door status. If the doorFlag has lower priority than DoorStatus.lockFlags/unlockFlags, the operation will fail.

Request    
Parameter Type Description
deviceID uint32 The ID of the device
doorIDss uint32[] The IDs of the doors to be reset
doorFlag uint32 One of DoorFlag

SetAlarm

Change the Status.alarmFlags of doors.

Request    
Parameter Type Description
deviceID uint32 The ID of the device
doorIDss uint32[] The IDs of the doors whose alarmFlags will be changed
alarmFlag uint32 A mask of AlarmFlag

Updated: