You can configure some system-level options using SystemConfig.

Config

message SystemConfig {
  int32 timeZone;
  bool syncTime;
  bool isLocked; 
  bool useInterphone;
  bool OSDPKeyEncrypted;
  bool useJobCode;
  bool useAlphanumericID;
  CameraFrequency cameraFrequency;
  bool useSecureTamper;
  uint32 useCardOperationMask;
  bool adminTwoStepAuth;
}
timeZone/syncTime
You can configure these options using TimeConfig.
isLocked
If true, it means that the device is locked and does not handle any user input. To unlock a locked device, use Device.Unlock.
useInterphone
If the device has an interphone, you can enable/disable it with this flag.
OSDPKeyEncrypted
If true, use the secure OSDP key.
useJobCode
If true, ask users to enter a job code. See JobCode.
useAlphanumericID
If true, allow alphanumeric IDs. The CapabilityInfo.alphanumericIDSupported should be true.

cameraFrequency :

useSecureTamper
If true, delete sensitive data such as users, logs, keys, and certificates from the device when its tamper switch is on.
useCardOperationMask
Provides a card selective option not to read all kinds of cards from the device. You can select multiple cards using MASK. The user can select or deselect of a specific card reading option using this option. However, it can be applied to the card types the device supporting. If you add a card type which isn’t supported from the device would be ignored. Also, the required card type MASK should be combined with CARD_OPERATION_MASK_USE. For example, useCardOperationMask needs to be configured 0x80000001 when EM card is selected only.
Value Define Description
0xFFFFFFFF CARD_OPERATION_MASK_DEFAULT Please define and use it in your codes
0x80000000 CARD_OPERATION_MASK_USE Please define and use it in your codes
0x00000800 CARD_OPERATION_MASK_CUSTOM_DESFIRE_EV1  
0x00000400 CARD_OPERATION_MASK_CUSTOM_CLASSIC_PLUS  
0x00000200 CARD_OPERATION_MASK_BLE  
0x00000100 CARD_OPERATION_MASK_NFC  
0x00000080 CARD_OPERATION_MASK_SEOS  
0x00000040 CARD_OPERATION_MASK_SR_SE  
0x00000020 CARD_OPERATION_MASK_DESFIRE_EV1  
0x00000010 CARD_OPERATION_MASK_CLASSIC_PLUS  
0x00000008 CARD_OPERATION_MASK_ICLASS  
0x00000004 CARD_OPERATION_MASK_MIFARE_FELICA  
0x00000002 CARD_OPERATION_MASK_HIDPROX  
0x00000001 CARD_OPERATION_MASK_EM  
adminTwoStepAuth
[+ V1.9] Sets whether to perform 2-step master admin authentication. This value cannot be changed on new devices that support master admin due to CE RED (European Directive for Radio Equipment). It can only be changed when upgrading from an existing device that does not support it. If set to false, only 1-step authentication is performed, and authentication is performed only with the credential information assigned to the master admin, regardless of information such as BS2AuthConfig or BS2AuthConfigEx that affect general user authentication. If set to true, 2-step authentication will be performed, and authentication may fail if the device is only capable of performing 1-step authentication due to insufficient credentials or other reasons. See MasterAdmin.
enum CameraFrequency {
  FREQ_NONE = 0x00;
  FREQ_50HZ = 1;
  FREQ_60HZ = 2;
}

GetConfig

Get the system configuration of a device.

Request
Parameter Type Description
deviceID uint32 The ID of the device
Response
Parameter Type Description
config SystemConfig The system configuration of the device

SetConfig

Change the system configuration of a device.

Request
Parameter Type Description
deviceID uint32 The ID of the device
config SystemConfig The system configuration to be written to the device

SetConfigMulti

Change the system configurations of multiple devices.

Request
Parameter Type Description
deviceIDs uint32[] The IDs of the devices
config SystemConfig The system configuration to be written to the devices

Updated: